[bebe@darkk ~]$ dmsg bash: dmsg: command not found [bebe@darkk ~]$ dmesg Linux version 2.6.3-4mdk (nplanel@n3.mandrakesoft.com) (gcc version 3.3.2 (Mandrake Linux 10.0 3.3.2-6mdk)) #1 Tue Mar 2 07:26:13 CET 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000002ff87000 (usable) BIOS-e820: 000000002ff87000 - 000000002ffa6000 (ACPI data) BIOS-e820: 000000002ffa6000 - 0000000030000000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) 767MB LOWMEM available. found SMP MP-table at 000fe710 hm, page 000fe000 reserved twice. hm, page 000ff000 reserved twice. hm, page 000f0000 reserved twice. On node 0 totalpages: 196487 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 192391 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. ACPI: RSDP (v000 DELL ) @ 0x000fd730 ACPI: RSDT (v001 DELL DIM 8100 0x00000005 ASL 0x00000061) @ 0x000fd744 ACPI: FADT (v001 DELL DIM 8100 0x00000005 ASL 0x00000061) @ 0x000fd774 ACPI: SSDT (v001 DELL st_ex 0x00001000 MSFT 0x0100000b) @ 0xfffe6f39 ACPI: BOOT (v001 DELL 8100 0x00000005 ASL 0x00000061) @ 0x000fd7e8 ACPI: DSDT (v001 DELL dt_ex 0x00001000 MSFT 0x0100000b) @ 0x00000000 ACPI: PM-Timer IO Port: 0x808 Intel MultiProcessor Specification v1.4 IMCR and PIC compatibility mode. SMP mptable: null local APIC address! BIOS bug, MP table errors detected!... ... disabling SMP support. (tell your hw vendor) Built 1 zonelists Kernel command line: BOOT_IMAGE=alt_263-4-test ro root=341 devfs=mount splash=silent bootsplash: silent mode. No local APIC present or hardware disabled Initializing CPU#0 PID hash table entries: 4096 (order 12: 32768 bytes) Detected 1296.709 MHz processor. Using pmtmr for high-res timesource Console: colour dummy device 80x25 Memory: 773892k/785948k available (1815k kernel code, 11276k reserved, 846k data, 272k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 2564.09 BogoMIPS Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 171k freed CPU: After generic identify, caps: 3febf9ff 00000000 00000000 00000000 CPU: After vendor identify, caps: 3febf9ff 00000000 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 256K CPU: After all inits, caps: 3febf9ff 00000000 00000000 00000080 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU#0: Intel P4/Xeon Extended MCE MSRs (12) available CPU#0: Thermal monitoring enabled CPU: Intel(R) Pentium(R) 4 CPU 1300MHz stepping 07 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX NET: Registered protocol family 16 EISA bus registered PCI: PCI BIOS revision 2.10 entry at 0xfc10e, last bus=2 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040211 Looking for DSDT in initrd ... not found! ACPI: IRQ9 SCI: Level Trigger. ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 6 7 9 10 11 12 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 15) Linux Plug and Play Support v0.97 (c) Adam Belay PnPBIOS: Disabled ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 9 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 3 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' vesafb: framebuffer at 0xf0000000, mapped to 0xf0807000, size 16384k vesafb: mode is 800x600x16, linelength=1600, pages=3 vesafb: protected mode interface info at c000:b139 vesafb: scrolling: redraw vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 fb0: VESA VGA frame buffer device SBF: Simple Boot Flag extension found and enabled. SBF: Setting boot flags 0x1 apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: overridden by ACPI. ikconfig 0.7 with /proc/config* VFS: Disk quotas dquot_6.5.1 devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 Initializing Cryptographic API isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found bootsplash 3.1.3-2003/11/14: looking for picture.... silentjpeg size 35024 bytes, found (800x600, 34976 bytes, v3). Console: switching to colour frame buffer device 92x32 pty: 1024 Unix98 ptys configured Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS4 at I/O 0xecd0 (irq = 3) is a 16550A RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH2: IDE controller at PCI slot 0000:00:1f.1 ICH2: chipset revision 2 ICH2: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA hda: WDC WD400BB-75AUA1, ATA DISK drive hdb: Maxtor 6Y060L0, ATA DISK drive Using anticipatory io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: LG CD-RW CED-8080B, ATAPI CD/DVD-ROM drive hdd: IOMEGA ZIP 250 ATAPI, ATAPI FLOPPY drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) /dev/ide/host0/bus0/target0/lun0: p1 hdb: max request size: 128KiB hdb: Host Protected Area detected. current capacity is 66055248 sectors (33820 MB) native capacity is 120103200 sectors (61492 MB) hdb: 66055248 sectors (33820 MB) w/2048KiB Cache, CHS=65531/16/63, UDMA(100) /dev/ide/host0/bus0/target1/lun0: p1 p2 < p5 p6 > Console: switching to colour frame buffer device 92x32 mice: PS/2 mouse device common for all mice serio: i8042 AUX port at 0x60,0x64 irq 12 input: ImPS/2 Generic Wheel Mouse on isa0060/serio1 serio: i8042 KBD port at 0x60,0x64 irq 1 input: AT Translated Set 2 keyboard on isa0060/serio0 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 EISA: Probing bus 0 at eisa0 NET: Registered protocol family 2 IP: routing cache hash table of 8192 buckets, 64Kbytes TCP: Hash tables configured (established 262144 bind 65536) NET: Registered protocol family 1 BIOS EDD facility v0.12 2004-Jan-26, 2 devices found Please report your BIOS at http://linux.dell.com/edd/results.html PM: Reading pmdisk image. PM: Resume from disk failed. ACPI: (supports S0 S1 S3 S4 S5) md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. RAMDISK: Compressed image found at block 0 EXT2-fs warning: checktime reached, running e2fsck is recommended VFS: Mounted root (ext2 filesystem). Mounted devfs on /dev kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Mounted devfs on /dev Freeing unused kernel memory: 272k freed Real Time Clock Driver v1.12 drivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1 uhci_hcd 0000:00:1f.2: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1f.2 to 64 uhci_hcd 0000:00:1f.2: irq 11, io base 0000ff80 uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected uhci_hcd 0000:00:1f.4: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1f.4 to 64 uhci_hcd 0000:00:1f.4: irq 9, io base 0000ff60 uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected usb 1-1: new full speed USB device using address 2 drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005 drivers/usb/core/usb.c: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver EXT3 FS on hdb1, internal journal SCSI subsystem initialized imm: Version 2.05 (for Linux 2.4.0) parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP] parport0: irq 7 detected parport0: cpp_daisy: aa5500ff(08) parport0: assign_addrs: aa5500ff(08) parport0: cpp_daisy: aa5500ff(08) parport0: assign_addrs: aa5500ff(08) ppa: Version 2.07 (for Linux 2.4.x) Adding 511520k swap on /dev/hdb5. Priority:-1 extents:1 gameport: pci0000:02:0a.1 speed 864 kHz hw_random: RNG not detected Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected an Intel i850 Chipset. agpgart: Maximum main memory to use for agp memory: 690M agpgart: AGP aperture is 128M @ 0xe8000000 kjournald starting. Commit interval 5 seconds EXT3 FS on hdb6, internal journal EXT3-fs: mounted filesystem with ordered data mode. Supermount version 2.0.4 for kernel 2.6 loop: loaded (max 8 devices) hdc: ATAPI 32X CD-ROM CD-R/RW drive, 2048kB Cache, DMA Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide hdd: No disk in drive hdd: 0kB, 0/64/32 CHS, 4096 kBps, 512 sector size, 2941 rpm inserting floppy driver for 2.6.3-4mdk Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 NET: Registered protocol family 23 IrCOMM protocol (Dag Brattli) 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html 0000:02:0c.0: 3Com PCI 3c905C Tornado at 0xec00. Vers LK1.1.19 ide-floppy: hdd: I/O error, pc = 0, key = 2, asc = 3a, ascq = 0 ide-floppy: hdd: I/O error, pc = 1b, key = 2, asc = 3a, ascq = 0 hdd: No disk in drive NET: Registered protocol family 17 lp0: using parport0 (polling). lp0: console ready ide-floppy: hdd: I/O error, pc = 0, key = 2, asc = 3a, ascq = 0 ide-floppy: hdd: I/O error, pc = 1b, key = 2, asc = 3a, ascq = 0 hdd: No disk in drive devfs_mk_dev: could not append to parent for vcc/5 devfs_mk_dev: could not append to parent for vcc/7 devfs_mk_dev: could not append to parent for vcc/a7 NET: Registered protocol family 10 Disabled Privacy Extensions on device c035fa20(lo) IPv6 over IPv4 tunneling driver Disabled Privacy Extensions on device eedc8000(sit0) bootsplash 3.1.3-2003/11/14: looking for picture.... found (800x600, 10640 bytes, v3). bootsplash: status on console 0 changed to on bootsplash 3.1.3-2003/11/14: looking for picture.... found (800x600, 10640 bytes, v3). bootsplash: status on console 1 changed to on bootsplash 3.1.3-2003/11/14: looking for picture.... found (800x600, 10640 bytes, v3). bootsplash: status on console 2 changed to on bootsplash 3.1.3-2003/11/14: looking for picture.... found (800x600, 10640 bytes, v3). bootsplash: status on console 3 changed to on bootsplash 3.1.3-2003/11/14: looking for picture.... found (800x600, 10640 bytes, v3). bootsplash: status on console 4 changed to on bootsplash 3.1.3-2003/11/14: looking for picture.... found (800x600, 10640 bytes, v3). bootsplash: status on console 5 changed to on devfs_mk_dev: could not append to parent for vcc/a2 devfs_mk_dev: could not append to parent for vcc/6 devfs_mk_dev: could not append to parent for vcc/a6 devfs_mk_dev: could not append to parent for vcc/5 devfs_mk_dev: could not append to parent for vcc/a5 devfs_mk_dev: could not append to parent for vcc/4 devfs_mk_dev: could not append to parent for vcc/a4 devfs_mk_dev: could not append to parent for vcc/a3 eth0: no IPv6 routers present ide-floppy: hdd: I/O error, pc = 0, key = 2, asc = 3a, ascq = 0 ide-floppy: hdd: I/O error, pc = 1b, key = 2, asc = 3a, ascq = 0 hdd: No disk in drive devfs_mk_dev: could not append to parent for vcc/7 devfs_mk_dev: could not append to parent for vcc/a7 mtrr: 0xf0000000,0x2000000 overlaps existing 0xf0000000,0x1000000 ide-floppy: hdd: I/O error, pc = 0, key = 2, asc = 3a, ascq = 0 ide-floppy: hdd: I/O error, pc = 1b, key = 2, asc = 3a, ascq = 0 hdd: No disk in drive ide-floppy: hdd: I/O error, pc = 0, key = 2, asc = 3a, ascq = 0 ide-floppy: hdd: I/O error, pc = 1b, key = 2, asc = 3a, ascq = 0 hdd: No disk in drive ide-floppy: hdd: I/O error, pc = 0, key = 2, asc = 3a, ascq = 0 ide-floppy: hdd: I/O error, pc = 1b, key = 2, asc = 3a, ascq = 0 hdd: No disk in drive ide-floppy: hdd: I/O error, pc = 0, key = 2, asc = 3a, ascq = 0 ide-floppy: hdd: I/O error, pc = 1b, key = 2, asc = 3a, ascq = 0 hdd: No disk in drive [bebe@darkk ~]$